5.5. Memory – displaying the last 99 measurements
At the end of a measurement, this monitor automatically stores each result
with date and time. This unit stores 99 memories for each of 2 users.
Viewing the stored values
With the unit off, press the "M" button. The display first shows "A," then
shows an average of all measurements stored in the unit. Please note:
Measurements for each user are averaged and stored separately. Be
certain that you are viewing the measurements for the correct user.
Pressing the "M" button again displays the previous value. To view a
particular stored memory, press and hold the "M" button to scroll to that
stored reading.
Memory full
When the memory has stored 99 results, a new, measured value is stored
by overwriting the oldest value.
Clear all values
If you are sure that you want to permanently remove
all stored values, hold down the "M" button (the
instrument must have been switched off beforehand)
until "CL" appears and then release the button. If you
do not want to clear the values, press the POWER
button. To permanently clear the memory, press the
"M" button while "CL" is flashing.
Individual values cannot be cleared.
5.6. Discontinuing a measurement
If it is necessary to interrupt a blood pressure measurement for any reason
(e.g., the patient feels unwell), the POWER button can be pressed at any
time. The device then immediately lowers the cuff pressure automatically
and enters sleep mode.
14
1
