4. Once you have set the last minute and
pressed the TIME button, the date and
time are set and the time is displayed.
5. If you want to change the date and time,
press and hold the TIME button down for
approximately 3 seconds until the year
number starts to flash. Now you can
enter the new values as described above.
4.3. Using the AC power adapter
You may also operate this monitor using the
included AC adapter. Use only the included
AC adapter to avoid damaging the unit.
a) Ensure that the AC adapter and cable are
not damaged.
b) Plug the adapter cable into the AC
adapter port on the right side of monitor.
c) Plug the AC adapter into a 110 V power
socket (U.S. or Canada).
d) Test that power is available by pressing
the POWER button.
Note:
• No power is taken from the batteries
while the AC adapter is connected to the
instrument.
• If the power is interrupted during a
measurement (e.g., by removal of the
adapter from the wall socket), the instru-
ment must be reset by removing the plug
from the instrument.
If you have any questions regarding the AC
adapter, call us at 1-800-568-4147.
4.4. Cuff tube connection
Insert the yellow cuff tube connector into the
yellow socket on the left side of the instrument.
8
