Microh FOG HORN 1200 User Manual Download

Page: 7 / 8

We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use
alcohol or solvents.

There are no serviceable parts inside the device. Please refer to the instructions under
“Installation instructions”.

Should you need any spare parts, please order genuine MICROH parts from your local dealer.

IF YOU SHOULD EXPERIENCE ANY PROBLEMS OR ISSUES PLEASE CONTACT MICROH
PROFESSIONAL PRODUCTS BY EMAIL AT

In the event that your unit is defective in any way, please contact your local dealer to
obtain an RA number for service repair.

Disclaimer

MICROH

believes that the information contained in this manual is

accurate in all respects. However,

MICROH

assumes no responsibility for any errors or

omissions in this document.

MICROH

reserves the right to revise and make changes to

the content of this document without obligation that

MICROH

notify any person or

company of such revision or changes. This does not in any way constitute a commitment
by

MICROH

to make such changes.

MICROH

may issue a revision of this manual or a

new edition to incorporate such changes.

Summary of Contents for FOG HORN 1200








