Operation
· Do not operate this product if you see damage to the housing, fluid tank, or cables. Have the
damaged parts replaced by an authorized technician at once.
· Be sure that no ventilation slots on the product’s housing are blocked.
· The fog exits the nozzle at a very high temperature. Keep a minimum distance of 6.5ft (2 m)
from the nozzle to the nearest object.
· The product’s nozzle is very hot during operation and it remains hot for a long time after
operation has stopped.
· The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at a higher
temperature.
· In the event of a serious operating problem, stop using this product immediately!
· Do not add perfume, alcohol, gasoline, or any other flammables to the fog fluid.
· Operates best with
MICROH’
s ‘MAXIMUM’
water-based High Density Fog Fluid (HDF).
3. MOUNTING AND INSTALLATION
Caution:
For added protection, mount the fixtures in areas outside walking paths, seating areas,
or in areas were the fixture might be reached by unauthorized personnel. Before mounting the
fixture to any surface, make sure that the installation area can hold a minimum point load of 10
times the device’s weight. Fixture installation must always be secured with a secondary safety
attachment, such as an appropriate safety cable. Never stand directly below the device when
mounting, removing, or servicing the fixture.
Whether installing inverted on a truss / ceiling or set on a flat level surface (see illustration
below). Be sure this fixture is kept at least 0.5m (1.5 ft.) away from any flammable materials
(decoration etc.). Always use and install the supplied safety cable as a safety measure to prevent
accidental damage and/or injury in the event the clamp fails.
Mounting Points:
Overhead mounting requires extensive experience, including calculating
working load limits. A knowledge of the installation material being used and periodic safety
inspection of all installation material and the fixture are all imperative and should only be
performed by a qualified technician. Improper installation can result in bodily injury and damage.
Be sure to complete all rigging and installation procedures before connecting the main power
cord to the appropriate wall outlet.
2
