Clamp Mounting:
The MICROH FOG HORN 1200 fogger provides a unique mounting bracket
assembly that integrates 2 brackets to be used to mount on a truss or the floor. When mounting
this fixture to truss, be sure to secure an appropriately rated clamp to the included bracket fitted
through the center hole. As an added safety measure, be sure to attach at least one properly
rated safety cable to the fixture.
Regardless of the rigging option you choose for your MICROH FOG HORN 1200 fogger, always
be sure to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a
safety cable on the hanging bracket as illustrated above. Be sure to only use the designated
rigging point for the safety cable and never secure a safety cable to a carrying handle.
5. SETUP
Be sure the unit is unplugged from the power source, remove the cap from the tank, and add the
‘MAXIMUM’ fog fluid up to fluid fill line. Be sure to not over fill the tank. Replace the cap and plug
unit in.
Turn the power switch on; you will notice the tank lights up RED. Once the unit is ready for use,
the illuminated tank will change to BLUE. Heat-up will take 3-5 minutes.
3
