Printer Commands
Chapter 5
5-38
428M Operator’s Manual - 880028-0112
command is most effective when used in conjunction with the Tag/Tear and
Peel-n-Dispense modes. The “^A1” enables the Infinity Print while a “^A0” will
disable this function.
XX
75
Load Label Count:
Instructs the printer to print a batch of labels using the
serial number function if enabled. If the serial number function is disabled, the
^D75 command will print the number of copies (the same label) specified by
the “^Axx” sequence just like the ^D73 command. This command may also be
used in conjunction with the ^D73 command. The batch of labels is printed
once a ^D3 command is executed; therefore the ^D75 command must be
issued before the ^D3 command. The only difference between this command
and the ^D73 is the ability to increment and/or decrement sequential numbers
in a batch.
XXX 76
Load Delay Time Between Printed Labels:
Delays the printing between
labels in a batch. The “^Axxx” specifies the delay time in tenths of a second
with a maximum value of 650. For example, “^A10^D76<CR>” would
introduce a one second delay between printed labels. This command is
typically used in conjunction with the Peel-n-Dispense mode and applicators.
5.7 Label Header Parameter Override Commands
It is possible to override label header parameters by adding one or more of the following
commands after the label format.
^A
^D
COMMAND
40
Clears Commands 41 through 51
XX
41
Load Number of Fields in Layout (HFM):
The ^Axx specifies the value.
XX
42
Load Label Width in dots (LSX):
The ^Axx specifies the value.
XX
43
Load Label Height in dots (LSY):
The ^Axx specifies the value.
XX
44
Load the Web Size in dots (WEB):
The ^Axx specifies the value.
XX
45
Load the Gap Size in dots (GAP):
The ^Axx specifies the value.
XX
46
Load Print Speed:
The ^Axx specifies the value.
XX
47
Load the Label Control Byte (LCB):
The ^Axx specifies the value.
XX
48
Load the Number of Steps to Activate Gap Detector (AGD):
The ^Axx
specifies the value in Dot Rows.
XX
49
Load the Number of Steps Past Gap (SPG):
The ^Axx specifies the value
in Dot Rows.
XX
50
Load X Direction Offset (OFX):
The ^Axx specifies the value.
XX
51
Load Y Direction Offset (OFY):
The ^Axx specifies the value.
Summary of Contents for 428M
