Chapter 4
Designing Labels with LDS
428M Operator’s Manual - 880028-0112
4-7
PRINT SPEED
DPS VALUE
MM PER
SECOND
INCHES PER
SECOND
INCHES PER
MINUTE
00
203.2
8.0
480
01
190.5
7.5
450
02
177.8
7.0
420
03
165.1
6.5
390
04
152.4
6.0
360
05
139.7
5.5
330
06
127.0
5.0
300
07
114.3
4.5
270
08
101.6
4.0
240
09
88.9
3.5
210
10
76.2
3.0
180
11
63.5
2.5
150
12
50.8
2.0
120
13
38.1
1.5
90
Table 4-1
DPS Values
4.4.7
LCB
(Label Control Byte)
HFM, LSX, LSY, WEB, GAP, DPS,
LCB
, AGD, SPG, OFX, OFY
This parameter selects the method the printer uses for detecting registration marks on the
different media types. The428M printer has both upper (transmissive) and lower (reflective)
gap detectors as standard equipment. The following sections discuss the LCB settings for
the different media types.
4.4.7.1
Die-Cut and Blow-Hole Media (setting = 0)
A selection of “0” in the LCB parameter instructs the printer to detect the leading edge of a
die-cut label or a “blow-hole” to identify the start of the next label. In this method light from
the lower sensor passes through the stock to the detector in the upper sensor. This is
referred to as “transmissive” sensing. The label sample (Figure 4-2) is die-cut, therefore,
the LCB is set to “0”.
4.4.7.2
Continuous Media (setting = 2)
If the LCB parameter is set to a value of “2”, the printer will not search for a registration
mark. The gap detectors are only used for stock out conditions when set for continuous
media types. The printer will print all fields that contain data and then advance the media by
the amount specified in the SPG parameter of the header when the default AGD of “1” is
entered in the header. This means that fields that are left blank or text data for the
associating format fields are left empty will not print.
Summary of Contents for 428M
