manualshive.com logo in svg

Microcom 428M, Operator'S Manual

The Microcom 428M Operator's Manual is a comprehensive guide that provides users with detailed instructions to set up and optimize their device. Available for free download at manualshive.com, this manual ensures a seamless experience with the Microcom 428M, empowering users to delve into its full potential.

Share
Download
background image

428M Operator’s Manual - 880028-0112  

12-23 

RTS (Request To Send)

 - A status signal from the host PC (DTE) to the printer (DCE) 

indicating when the PC has data to send to the printer.  The printer (DCE) will only transmit 
data to the PC (DTE) when it sees RTS up.  RTS comes into the printer on pin #7 of the RS-
232 connector. 
 

RXD (Receive Data)

 - An essential signal that carries data from the printer (DCE) to the 

host PC (DTE) for 2-way RS-232 serial communication.  Signal is also known as RX and 
RD.  RXD leaves the printer on pin #2 of the RS-232 connector. 
 

SDRAM (Synchronous Dynamic Random Access Memory)

 – High density random 

access memory that is commonly used to store application code.  The 324M & 424M 
printers do NOT use this type of memory. 

  
SRAM (Static Random Access Memory)

 – High speed random access memory that is 

used to store label formats, graphics, and fonts temporarily.  The slice buffer and serial 
buffer (10Kbyte) are also in SRAM.  This is volatile memory, which means that the 
information is lost when the printer powers down. The 428M printers use a 512Kbyte SRAM 
configured as 256K x 16. 
 

Tag stock

 - Media that typically has no adhesive backing, thicker in nature, and generally is 

a fanfold type media. 
 

Thermal print head

 - A print head that uses thermal technology, to heat individual elements 

or dots to produce images.  Also referred to as print head in this manual. 
 

TXD (Transmit Data)

 - An essential signal that carries data from the host PC (DTE) to the 

printer (DCE) for 2-way RS-232 serial communication.  Also known as TX and TD.  This 
signal comes into the printer on pin #3 of the RS-232 connector. 
 

USB (Universal Serial Bus)

 - A high-speed asynchronous serial interface that connects a 

PC to a peripheral, such as a printer.  There are 3 versions of USB: 

1) USB 1.0  transfers at 1M bits/second.  (Hardly used at all anymore). 
2) USB 1.1  transfers at 12M bits/second.  (The 324 & 424 printers use this). 
3) USB 2.0  transfers at 480M bits/second.  (All newer PC’s use this).  

Summary of Contents for 428M
















































































































































































































Reviews:

No comments

Related manuals for 428M

Fargo Persona C25 Printer Selection Manual preview
Persona C25
Brand: Fargo Pages: 6
Fargo DTC4500e User Manual preview
DTC4500e
Brand: Fargo Pages: 90
Fargo DTC1000 User Manual preview
DTC1000
Brand: Fargo Pages: 126
FARGO electronics FARGO DTC 400 User Manual preview
FARGO DTC 400
Brand: FARGO electronics Pages: 278
Variquest Perfecta 3600STP Assembly Instructions Manual preview
Perfecta 3600STP
Brand: Variquest Pages: 12
Variquest Perfecta 3600STP User Manual preview
Perfecta 3600STP
Brand: Variquest Pages: 231
Variquest Awards Maker 400 Instructions preview
Awards Maker 400
Brand: Variquest Pages: 4
Canon iR6570 series Service Manual preview
iR6570 series
Brand: Canon Pages: 684
Xerox Phaser 6700V/DX User Manual preview
Phaser 6700V/DX
Brand: Xerox Pages: 162
Konica Minolta bizhub C227 Installation Manual preview
bizhub C227
Brand: Konica Minolta Pages: 12
Output Technology EuroLine Series Operator'S Manual preview
EuroLine Series
Brand: Output Technology Pages: 73
Xerox HP Toner Cartridges 6R941 Quick Reference Sheet preview
HP Toner Cartridges 6R941
Brand: Xerox Pages: 2
CNET CNP-101UW Specifications preview
CNP-101UW
Brand: CNET Pages: 2
Oce OP14 Operation Manual preview
OP14
Brand: Oce Pages: 66
UP BOX pp3dp User Manual preview
BOX pp3dp
Brand: UP Pages: 37
Tachosys digiprint Instruction Manual preview
digiprint
Brand: Tachosys Pages: 5
Roland ColorCAMM Pro User Maintenance Manual preview
ColorCAMM Pro
Brand: Roland Pages: 6
WOOSIM Porti-M100V Operator'S Manual preview
Porti-M100V
Brand: WOOSIM Pages: 27

Brands by name

Popular brands

Load more brands