Printer Commands
Chapter 5
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
410 Operators Manual
88
APPENDIX G: QUICK REFERENCE COMMAND SUMMARY
^A
^D
Command
2
Text string entry mode:
Precedes the text strings that are supplied to the
various fields in the label (Equivalent to ^B).
3
Print Command:
Prints a single label or starts the printing of a batch of labels.
(Equivalent to ^C)
5
Send Printer Status:
(Equivalent to ^E)
11
Print a Test Label:
(Equivalent to ^K)
12
Print a Blank Label:
(Equivalent to ^L)
20
Change baud rate:
An EEPROM command
0
110 Baud
1
150 Baud
2
300 Baud
3
600 Baud
4
1200 Baud
5
2400 Baud
6
4800 Baud
7
9600 Baud
8
19200 Baud
21
Change SW1:
Software dip switch #1. An EEPROM command. Below is the ^AB
sequence:
12345678
^ABxxxxxxxx
*******.Q
1=XON/XOFF Enable, 0=Disable
******.)Q
1=8 Data Bits, 0=7 Data Bits
*****.))Q
1=Echo Enable, 0=Disable
****.)))Q
1=No Parity, 0=Enable Parity
***.))))Q
1=Odd Parity, 0=Even Parity
**.)))))Q
1=Ignore Control Codes, 0=Accept
*.)))))))))),
.)))))))))),*
Enquiry Response
00 = Control Codes
10 = Text Equivalent
11 = ^ Equivalent
Summary of Contents for 410
