dsPICDEM™ 1.1 PLUS
DEVELOPMENT BOARD
©
2006 Microchip Technology Inc.
DS70099D-page 1
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
dsPICDEM™ 1.1 Plus Development Board. Items discussed in this chapter include:
• Conventions Used in this Guide
• Development Systems Customer Change Notification Service
ABOUT THIS GUIDE
This document describes how to use the dsPICDEM™ 1.1 Plus Development Board as
a development tool to emulate and debug firmware on a target board. The manual
layout is as follows:
• Chapter 1: Introduction – This chapter introduces the dsPICDEM™ 1.1 Plus
Development Board and provides a brief description of the hardware.
• Chapter 2: Using dsPIC30F Devices – This chapter goes through a basic
step-by-step process for getting your dsPICDEM™ 1.1 Plus Development Board
up and running with the MPLAB
®
In-Circuit Debugger 2 (ICD 2) using dsPIC30F
devices.
• Chapter 3: Demonstration Program Operation – This chapter presents a
detailed description of the operational functionality of the sample code, which is
preprogrammed into the dsPIC30F device.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.
