Using dsPIC30F Devices
©
2006 Microchip Technology Inc.
DS70099D-page 19
2.5
BUILDING THE CODE
In this project, building the code consists of assembling the
Tut6014A.s
file to create
an object file,
Tut6014A.o
, and then linking the object file to create the
Tut6014A.hex
and
Tut6014A.cof
output files. The
.hex
file contains the data nec-
essary to program the device and the
.cof
file contains additional information that lets
you debug at the source code level.
Before building, there are settings required to tell MPLAB IDE where to find the include
files and to reserve space for the extra debug code when the MPLAB ICD 2 is used.
The following line is near the top of the
Tut6014A.s
file:
.include "p30f6014A.inc"
This line causes a standard include file to be used. Microchip provides these files with
all the Special Function Register (SFR) labels already defined for convenience.
To build the code, select Build Options>Project from the Project> menu. The Build
Options dialog displays, as shown in Figure 2-7.
FIGURE 2-7:
BUILD OPTIONS
Browse to the location of the
assembler Include folder.
