BM63 EVB User’s Guide
DS70005274A - Page 24
Advance Information
2016 Microchip Technology Inc.
3.2
GETTING STARTED WITH BM63 EVB
To establish a Bluetooth connection between the BM63 EVB and a host device, per-
form the following actions:
1.
Set switch SW9 to Flash Application mode, see
Figure 3-1
.
FIGURE 3-1:
SW9 IN FLASH APPLICATION MODE
2.
Connect the speaker line to the amplifier output connector (CN1 and CN2).
3.
Connect 15V adapter to P2, as illustrated in
Figure 3-2
.
FIGURE 3-2:
USING EVALUATION BOARD
4.
Figure 3-3
illustrates the various push buttons on the BM63 EVB. To turn the
Bluetooth on, long press SW24 (MFB), then LED1 (blue) and LED2 (red) will
blink.
5.
Long press SW40 to enter the pairing mode (depending on the UART command
settings from the MCU to the Bluetooth module). LED1 (blue) and the LED2
(red) will blink alternatively to indicate that the BM63 EVB is discoverable.
Note:
Do not plug-in the USB cable.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
