Getting Started
2016 Microchip Technology Inc.
Advance Information
DS70005274A - Page 31
7.
In
Sys. Setup1
tab, from the UART Setting section, enable
Power On by
“Power On” Command
, see
Figure 3-11
. The module will power-on by UART
command and not by the MFB key.
FIGURE 3-11:
UART COMMAND SETTING
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
