BM63 EVB User’s Guide
DS70005274A - Page 56
Advance Information
2016 Microchip Technology Inc.
3.7
UPDATING MCU PARAMETERS
The on-board MCU is pre-programmed for dual-mode, and the MCU parameters needs
to be changed for other applications.To update the MCU parameters, perform these
actions:
1.
Plug the 15V DC adapter into the P2 jack to supplying power to the MCU.
2.
Connect the MPLAB REAL ICE/MPLAB ICD 3/PICkit
3 to ICSP header J5 and
then connect it to a host PC using the USB cable.
3. Ensure that a jumper on JP33 is connected. Open the MPLAB X IDE tool and a
window displays, see
Figure 3-41
.
FIGURE 3-41:
MPLAB
®
X IDE TOOL
Note:
Download and install the MPLAB X IDE tool, which is available on the
Microchip web site:
www.microchip.com/mplab/mplab-x-ide
.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
