IMPORTANT INFORMATION AND SAFETY INSTRUCTIONS
•
Installers should be qualified electricians or technicians.
•
The installation information in the manual is for information purposes only.
•
The monitoring and operation information in this manual is intended for anyone who needs to
operate the MPPT.
•
The MPPT input cannot be paralleled with another PV array.
•
Read the instructions carefully before installing and operating the MPPT.
•
MPPT connection and installation instructions must be followed.
•
The unit should only be opened by skilled personal.
•
Keep the MPPT clean and dry.
•
The MPPT will not operate without batteries connected to the MPPT.
•
The MPPT should be installed indoors, in a ventilated and dry area.
•
Mount the MPPT vertically.
•
Do not install the MPPT on a rugged or inclined surface.
•
Do not install the MPPT near water or in damp environments.
•
Do not install the MPPT where it would be exposed to direct sunlight.
•
Do not remove the MPPT casing.
•
Keep the MPPT away from heat emitting sources.
•
Do not block the MPPT ventilation openings.
•
Do not leave objects on top of the MPPT
•
Do not expose the MPPT to corrosive gasses.
•
Install the MPPT away from any explosive gasses.
•
Ambient temperature: 0°C
– 40°C.
•
Use panels of the same type and size in an array.
•
Sketches are intended for illustrative purposes only and are not intended to provide an
electrical design.
•
Damage caused by reverse polarity is not covered by warranty
.
•
Do not exceed the MPPT 150 Volt
maximum input voltage (Voc) rating.
•
Refer to your solar module documentation for the worst-case (coldest) module temperature
voltage, it should provide the V
oc
vs. temperature data.
•
Contact the battery manufacturer or supplier for the correct charging specifications.
•
Incorrect charging can damage or destroy batteries.
PLEASE BE AWARE:
WARRANTY WILL BE NULL AND VOID IF PANEL
SURGE PROTECTION IS NOT INSTALLED WITH
ALL LCD MPPT INSTALLATIONS
WARNING
High DC voltage present and is capable of causing severe injury.
.
