IM-LIPOTOWER Rev G
6
DESCRIPTION
1. IV/TUMESCENT POLE
2. CONTROL SWITCH
•
Determines the source of ON/OFF functions
of the vacuum pump.
•
BYPASS - Vacuum pumps stay on.
•
PAL CONTROL - Vacuum pumps are on
when PALhandpiece is on. This requires a
BNC cable (REF ASP-CBL-1020, or REF ASP-
CBL-5020) to be connected. (See Figure 4).
•
FOOT SWITCH CONTROL - Vacuum pumps
are on when footswitch is activated.
3. LCD SCREEN
•
Displays vacuum pressure and Tool settings.
4. VACUUM PRESSURE ADJUSTMENT
•
MAX - For maximum vacuum turn clockwise.
•
MIN - For minimum vacuum turn
counter-clockwise.
5. STANDBY SWITCH
•
ON (
|
) allows pumps to be activated by the
Control Switch.
•
STANDBY (
o
) turns vacuum pumps off.
6. STORAGE BASKET
7. LOCKING CASTERS
8. PUSH HANDLE
9. MAIN VACUUM CONNECTION
10. REAR STORAGE BASKET
11. POWER INLET AND MAINS DISCONNECT SWITCH
12. FOOT SWITCH CONNECTION
13. COOLING FANS
•
Do not block cooling fans or system may
overheat.
14. CANISTER RACK
•
Designed to securely hold wall-mount style
aspiration canisters or wall-mount style
canister rings.
15. TUMESCENT PUMP ON/OFF SWITCH
16. TUMESCENT PUMP SPEED ADJUSTMENT KNOB
17. TUMESCENT PUMP FOOT SWITCH CONNECTION
18. TUMESCENT PUMP MODULE
•
Standard on model ASP-1021 only.
To add module, use REF ASP-TUM.
19. SHELF
•
Supports MicroAire electric consoles
(REF 1020/1025, REF 5020/5025)
1
2
3
4
5
6
7
8
9
11
12
13
14
15
16
18
17
10
19
Summary of Contents for ASP-1021
