Mounting the sensor
Figure 2-1:
Notes
•
Do not use the meter to support the piping.
•
The meter does not require external supports. The flanges will support the meter in any orientation.
•
All pipework joints and couplings must be airtight to minimize the presence of gas bubbles in the
fluid.
2.2
Rotate the electronics on the meter (optional)
You can rotate the transmitter on the meter up to 90°.
1.
Using a 4 mm hex key, loosen the cap screw that holds the transmitter in place.
Mounting
12
Micro Motion Compact Density Meter
