Bypass installation: Pump
Figure 1-6:
A
B
C
A.
Vent
B.
Sample point
C.
Pump
1.3
Pressure drop in the meter
The pressure drop in the meter depends on the process conditions. The following figures
illustrate the pressure drop for the meter at varying fluid density and viscosity. In addition,
these charts show how the meter compares to the Micro Motion 7835/7845 liquid density
meters.
Important
For the most accurate pressure drop calculations using your process variables, use the Micro Motion
product selector available at
www.micromotion.com
.
Planning
Installation Manual
5
