Page 72
Appendix | Accessories
thermoMETER TIM 8 / thermoIMAGER TIM 40
Fig. 46 Control box of shutter, dimensions
Power supply
12 - 24 V
Upper terminal screw
Connection for Process Interface (PIF)
Switch for different operation
modes:
S1: Switching between switch operation and pulse operation
S2: Activation/deactivation of fast-closing mode
S3: Only for factory calibration (switch must be at normal)
S4: Switching between mV or mA input
Lower screw terminal
Connection for power supply, inputs (Start/Stop signal) and motor
Inputs (Start/Stop signal, max.
24 V, input is active LOW (open
input = HIGH))
IN 1: Trigger input for normal operation (S1)
IN 2: Currently no usage
IN 3: Trigger input for fast-closing mode (S2)
