Page 41
Software TIM Connect
thermoMETER TIM 8 / thermoIMAGER TIM 40
1
IR image from the camera
2
Temperature profile: Shows the temperatures along max. 2 lines at any size and position in the image.
3
Control displays: Displays all temperature values in the defined measure areas like Cold Spots, Hot
Spots, temperature at cursor, internal temperature and chip temperature.
Alarm settings: Bar showing the defined temperature thresholds for low alarm value (blue arrow) and
high alarm value (red arrow). The color of numbers within control displays changes to
red
(when
temp. above the high alarm value) and to
blue
(when temp. below the low alarm value).
4
Temperature of measure area: Analyses the temperature according to the selected shape, e.g. aver-
age temperature of the rectangle. The value is shown inside the IR image and the control displays.
5
Reference bar: Shows the scaling of temperature within the color palette.
6
Temperature time diagram: Shows the temperature curves over time for selectable region of interest
(ROI)
7
Histogram: Shows the statistic distribution of single temperature values.
8
Automatic / manual scaling of the palette (displayed temperature range): Man., </> (min, max), 1
s
: 1
Sigma, 3
s
: 3 Sigma, OPT: Palette optimization
9
Distance function: Adjustment of the motor focus to focus the IR picture
10
Menu and Toolbar (Icons)
11
Icon enabling switching between color palettes
12
Status bar: Serial number, optic, temperature range, cursor position, device framerate/ display frame-
rate, emissivity, ambient temperature, flag status
Further details to the software are in the enclosed CD.