Page 3
surfaceCONTROL 3D SC2500 / SC2510
5.
Light Source
The surfaceCONTROL 3D 25x0 sensor works with an LED lighting unit. Measurement is
performed using blue light at the dominant 462 nm wavelength. The sensor is included in
risk group 2 according to EN 62471: 2008.
Do not look into the lens. Consciously close your eyes or im-
mediately turn away if the optical radiation enters the eye.
The warning sign below is attached to the front side:
Fig. 1 LED warning sign
i
If the information sign is covered over when the unit is installed, the user must en-
sure that a supplementary information sign is attached at the installation location.
