MICRO-EPSILON MESSTECHNIK GmbH & Co. KG
Königbacher Str. 15 · 94496 Ortenburg/Germany
Phone +49 8542 / 168 0 · Fax +49 8542 / 168 90
[email protected] · www.micro-epsilon.com
Your local contact:
www.micro-epsilon.com/contact/worldwide/
X9771439-A012012MSC
MICRO-EPSILON is exclusively responsible for repairs.
It is not permitted to make unauthorized structural and / or technical modifications or
alterations to the product.
In the interest of further development, MICRO-EPSILON reserves the right to modify the
design.
In addition, the General Terms of Business of MICRO-EPSILON shall apply, which can be
accessed under Legal details | Micro-Epsilon
https://www.micro-epsilon.com/impressum/.
For translations into other languages, the German version shall prevail.
15.
Service, Repair
If the sensor, controller or cable harness is defec-
tive:
- If possible, save the current sensor settings in
a parameter set to reload them into the sensor
after the repair.
- Please send us the affected parts for repair or
exchange.
If the cause of a fault cannot be clearly identified,
please send the entire measuring system to:
INB Vision AG
Brenneckestraße 20, ZENIT II
39118 Magdeburg / Germany
Tel. +49 (0) 391 / 6117-300
Fax +49 (0) 391 / 6117-301
[email protected]
www.inb-vision.com
16.
Decommissioning, Disposal
In order to avoid the release of environmentally harmful substances and to ensure the
reuse of valuable raw materials, we draw your attention to the following regulations and
obligations:
- Remove all cables from the sensor and/or controller.
- Dispose of the sensor and/or the controller, its components and accessories, as well
as the packaging materials in compliance with the applicable country-specific waste
treatment and disposal regulations of the region of use.
- You are obliged to comply with all relevant national laws and regulations
