MICRO-EPSILON
X9751109-B060097MSC
35
Warranty
9.
Warranty
All components of the device have been checked and tested for perfect function in the
factory.
In the unlikely event that errors should occur despite our thorough quality control, this
should be reported immediately to MICRO-EPSILON.
The warranty period lasts 12 months following the day of shipment. Defective parts,
except wear parts, will be repaired or replaced free of charge within this period if you
return the device free of cost to MICRO-EPSILON.
This warranty does not apply to damage resulting from abuse of the equipment and
devices, from forceful handling or installation of the devices or from repair or
modifications performed by third parties.
No other claims, except as warranteed, are accepted. The terms of the purchasing
contract apply in full.
MICRO-EPSILON will specifically not be responsible for eventual consequential
damages.
MICRO-EPSILON always strives to supply the customers with the finest and most
advanced equipment. Development and refinement is therefore performed continuously
and the right to design changes without prior notice is accordingly reserved.
For translations in other languages, the data and statements in the German language
operation manual are to be taken as authoritative.
10.
Service, Repair
In the event of a defect in the sensor, sensor cable or controller the whole measuring
system must be sent back for repair or replacement.
In the case of faults the cause of which is not clearly identifiable, the whole measuring
system must be sent back to
MICRO-EPSILON Optronic GmbH
Lessingstraße 14
D-01465 Langebrück
Tel: +49 / 35201 / 729 - 0
Fax: +49 / 35201 / 729 - 90
[email protected]
www.micro-epsilon.com
