manualshive.com logo in svg

MICRO-EPSILON scanCONTROL 29 50 Series, Operating Instructions Manual

Share
Download
MICRO-EPSILON scanCONTROL 29 50 Series Operating Instructions Manual Download Page 30

Page 30

Mounting and Installation

scanCONTROL 29xx

5.2.2 

Power Supply 

Connector 

multifunction socket

, see Fig. 16, 

pin assignment

, see Fig. 17.

Range: 11 V – 30 V (nominal value 24 V) DC; load maximal 500 mA
The supply voltage is protected against reverse polarity.
The cable shield is connected with the connector housing and should be connected to the protective con-
ductor PE of the power supply.
The shielded multifunction cable PCR3000-x is recommended. 
The supply voltage for the scanCONTROL 29xx measuring device should come from a 24 V power supply, 
which is only used for measuring equipment and not simultaneously for drives, contactors or similar pulse 
interference sources. Use a power supply with galvanic isolation.

The multifunction 
socket must only 
be connected when 
the power supply is 
switched off.

 

> Damage to or 

destruction of the 
sensor

Summary of Contents for scanCONTROL 29 50 Series

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands