manualshive.com logo in svg

MICRO-EPSILON scanCONTROL 29 50 Series, Operating Instructions Manual

Share
Download
MICRO-EPSILON scanCONTROL 29 50 Series Operating Instructions Manual Download Page 22

Page 22

Delivery

scanCONTROL 29xx

4. 

Delivery

4.1 

Unpacking, Included in Delivery

 - 1 scanCONTROL 29xx sensor
 - 1 Assembly instructions
 - 1 Sensor acceptance report
 - 2 Protective caps
 - 1 PCR3000-5 Multifunction cable; 5 m long; for power supply, trigger and RS422; M12x1 screw connector 

and free cable ends

  Carefully remove the components of the measuring system from the packaging and ensure that the 

goods are forwarded in such a way that no damage can occur.

  Check the delivery for completeness and shipping damage immediately after unpacking.
  If there is damage or parts are missing, immediately contact the manufacturer or supplier.

You will find recommended and optional accessories in appendix

, see A 1.1, see A 1.2.

4.2 

Storage

Temperature range (storage):  -20 ... +70 °C (-4 ... +158 °F)
Humidity: 

5 - 95 % (non condensing)

Summary of Contents for scanCONTROL 29 50 Series

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands