Page 44
Safety
optoCONTROL 1200/1201
Avoid permanent accumulation of dust or splashed water on the measurement system. Keep the optics clean
by blowing them off, if necessary, or use a protective housing.
Damage to light source and receiver
Avoid damage (scratches) to the protective windows of the light source and receiver by using proper clean-
ing methods or cleaning solvents.
> Inaccurate, false measurements
Do not touch the protective windows of the light source and receiver with the fingers. Wipe off any fingerprints
immediately.
> Inaccurate, false measurements
1.3
Notes on CE Marking
The following apply to optoCONTROL 120x measuring system:
- EU Directive 2014/30/EU
- EU Directive 2011/65/EU
Products which carry the CE mark satisfy the requirements of the EU directives cited and the relevant appli-
cable harmonized European standards (EN). The measuring system is designed for use in industrial environ-
ments.
The EU Declaration of Conformity and the technical documentation are available to the responsible authori-
ties according to the EU Directives.
1.4
Intended Use
- The optoCONTROL series 120x is designed for use in industrial areas. It is used for measuring diameters,
gaps, edges and light quantity
- The system must only be operated within the limits specified in the technical data
.
- The system must be used in such a way that no persons are endangered or machines and other material
goods are damaged in the event of malfunction or total failure of the system.
- Take additional precautions for safety and damage prevention for safety-related applications.
Summary of Contents for ODC1200
Page 40: ...optoCONTROL 1200 1201...
Page 79: ......
