MICRO-EPSILON ODC1200, Operating Instructions Manual

Page: 75 / 80

Page 75
Appendix | sensorTOOL Software
optoCONTROL 1200/1201
English
A 3 sensorTOOL Software
In order to save measured data in a csv file, use the
sensorTOOL
program.
The sensorTOOL program gives you documented software that can be used for setting the sensors, for demonstration purposes, or
for quick visualization of the measurement data. The sensorTOOL program is available online at https://www.micro-epsilon.com/down-
load/software/sensorTOOL.exe .
Start the
sensorTOOL
program.
In the drop-down menus, select the
Interfaces sensor group
, and for
Sensor type
, select
IF1032/ETH.
Click on the button with the magnifying glass icon.
All available channels will now be displayed in the
Search Results (x)
overview , see Fig. 16 .
Fig. 16 First interactive site after calling the sensorTOOL
Click on the button
Open Website
to make further settings , see A 3.1 and to start the data acquisition in the
sensorTOOL
, see
A 3.3 .