Page 8
Laser Class
optoNCDT ILR 102x/110x/115x
2.
Laser Class
The optoNCDT 102x/110x/115x sensors operate with a semiconductor laser for measurements and adjust-
ment of the sensor.
Laser type, wavelength
Laser class
ILR1020-6
ILR1021-30
ILR1100-6 / ILR1101-50 /
ILR1150-10 / ILR1151-250
Measurement laser
1 (I)
Infrared, 905 nm
Infrared, 900 nm
Mounting/adjust-
ment laser
1 (I)
Red, 650 nm
Red, 650 nm
Red, 650 nm
Class 1/2 (I, II) lasers do not require a laser safety officer or any additional laser indicator.
i
Observe the laser protection regulations!
The accessible radiation is harmless under foreseeable conditions.
For class 1 lase devices an impairment of color vision and annoyance e.g. by glare can not be excluded.
Let perform maintenance and repair only by authorized service personnel!
The sensor complies with all applicable laws for the manufacturer of laser devices.
This system is classified by the Center for Devices and Radiological Health (CDRH) as a Class I laser device.
The housing of the optical sensors optoNCDT 102x/110x/115x may only be opened by the manufacturer. For
repair and service purposes the sensors must always be sent to the manufacturer, see Chap.
9.
Attach the following supplied laser label clearly visible to the sensor housing:
Fig. 1 Laser label optoNCDT ILR 102x/110x/115x
Never deliberately
look into the laser
beam!
