manualshive.com logo in svg

MICRO-EPSILON ILR1020-6, Operating Instructions Manual

Share
Download
MICRO-EPSILON ILR1020-6 Operating Instructions Manual Download Page 6

Page 6

Safety

optoNCDT ILR 102x/110x/115x

1.3 

Notes on CE Marking

The following apply to the optoNCDT 102x/110x/115x: 

 - EU Directive 2014/30/EU 
 - EU Directive 2011/65/EU, “RoHS” category 9

Products which carry the CE mark satisfy the requirements of the EU directives cited and the European 
harmonized standards (EN) listed therein. The EU Declaration of Conformity is available to the responsible 
authorities according to EU Directive, article 10, at:
MICRO-EPSILON Eltrotec GmbH 
Heinkelstraße 2 
73066 Uhingen / Germany

The measuring system is designed for use in industrial environments and meets the requirements.

1.4 

Intended Use

 - The optoNCDT 102x/110x/115x is designed for use in industrial applications. It is used for

 

ƒ

distance measuring, 

 

ƒ

positioning and 

 

ƒ

robot control.

 - The system must only be operated within the limits specified in the technical data, see Chap. 

3.3

.

 - The system

 must be used in such a way that no persons are endangered or machines and other material 

goods are damaged in the event of malfunction or total failure of the system.

 - Take additional precautions for safety and damage prevention for safety-related applications.

Summary of Contents for ILR1020-6





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands