MICRO-EPSILON ILD2200-10, Instruction Manual

Page: 52 / 72

Page 52
Serial Interface RS422
optoNCDT 22xx
Format: Response:
31 24 23 16 15 8 7 0 hex 31 24 23 16 15 8 7 0 hex
“+“ “+“ “+“ 0x0D 0x2B2B2B0D “I“ “L“ “D“ “1“ 0x494C4431
“I“ “L“ “D“ “1“ 0x494C4431 0xA0 0x7d 0x00 0x02 0xA07D0002
0x20 0x7d 0x00 0x03 0x207D0003 0x20 0x20 0x0D 0x0A 0x20200D0A
0x00 0x00 0x00 0x0X 0x0000000X
Value for X (0, 1, 2)
Reset Command 7.8
Name RESET
Description: The sensor makes a software reset. The standard settings for averaging and zero are
used. The response is sent before the reset is done.
Format: Response:
31 24 23 16 15 8 7 0 hex 31 24 23 16 15 8 7 0 hex
“+“ “+“ “+“ 0x0D 0x2B2B2B0D “I“ “L“ “D“ “1“ 0x494C4431
“I“ “L“ “D“ “1“ 0x494C4431 0xA0 0xF0 0x00 0x02 0xA0F00002
0x20 0xF0 0x00 0x02 0x20F00002 0x20 0x20 0x0D 0x0A 0x20200D0A
Start Command 7.9
Name START
Description: Output of data via serial output is started.
Format: Response:
31 24 23 16 15 8 7 0 hex 31 24 23 16 15 8 7 0 hex
“+“ “+“ “+“ 0x0D 0x2B2B2B0D “I“ “L“ “D“ “1“ 0x494C4431
“I“ “L“ “D“ “1“ 0x494C4431 0xA0 0x77 0x00 0x02 0xA0770002
0x20 0x77 0x00 0x02 0x20770002 0x20 0x20 0x0D 0x0A 0x20200D0A
Note: When switching the sensor on Stop (data output) is on. The „stop“ command is transient and will
be lost when switching off the power supply or when sending the reset command.