Page 36
Measuring Setup and Commissioning
optoNCDT 22xx
6.3.6
Setting the Average Mode
Press and hold the
AVG
key on the controller.
Switch on the controller.
Averaging mode
LED
Status
Front view of the
controller
Moving
AVG 1
AVG 2
ON
OFF
Recursive
AVG 1
AVG 2
ON
OFF
Median
AVG 1
AVG 2
ON
ON
Selection of the averaging method
Fig. 17
After switching on, the various averaging modes will be enabled internally in cycle and each one indicated via
the LEDS avg1 and avg2 for 1 second each:
Release the
AVG
key when the required averaging method is indicated.
