Page 32
Measurement Value Output
optoNCDT 1402
Digital Value Output
7.2
Data Protocol ILD1401
7.2.1
The digital measurement values are issued as unsigned digital values (raw values).
Digital value
Used for
0 ... 39
SMR back-up
40 ... 4055
Measurement range
4056 ... 4095 EMR back-up
Calculation of a measurement value in mm from digital output:
Reference value Start of Measuring Range:
Reference value Midrange
x [mm] = (digital
OUT
* - 0.01) * MR [mm]
1.02
4096
x [mm] = (digital
OUT
* - 0.51) * MR [mm]
1.02
4096
Example: MR =10 mm, digital value = 2048, measurement value = 5 mm or 0 mm
Note: A digital value can be calculated from a measurement value (millimeter) as follows:
digital = + 0.01 *
OUT
x [mm]
MR [mm]
4096
1.02
Data Protocol ILD1402
7.2.2
The digital measurement values are issued as unsigned digital values (raw values).
Digital value
Used for
Digital value
Used for
0 ... 16367
Value range
16208 ... 16367
EMR back-up (1 %)
0 ... 160
SMR back-up (1 %)
16370 ... 16383
Error codes
161 ... 16207 Measurement range
