Page 26
optoCONTROL EDU190
Edge light/dark
Position of the first light/dark edge (distance from the start of line)
Edge dark/light
Position of the first dark/light edge (distance from the start of line)
Diameter/width
Measure, position and center axis of an outer diameter or width of a metal sheet (first light/
dark and last dark/light edge)
Gap
Measure, position and center axis of an outer diameter or width of a metal sheet (first light/
dark and last dark/light edge)
Arbitrary segments
Differences, positions and numbering or order of the edges.
Fig. 11 Different measuring programs, example ODC 2520
i
Please note that the meaning of the displayed icons for the measuring programs may differ significantly
depending on the connected sensor.
Therefore, please refer to the corresponding operating instructions of the connected sensor for the exact
measurement program meaning of the connected sensor and the displayed measuring program icon.
