Page 14
Installation and Assembly
optoCONTROL EDU190
4.1
Pin Assignment
Depending on the available sensor interface, the optoCONTROL ODC sensors with digital interface can be
connected to this EDU190 digital display either via LAN connection or COM connection.
Power supply
LAN connection
COM connection
RS422 / RS232
Item
Connection
Description
1
Power supply
+24 VDC (18 ... 32 VDC)
2
LAN A
1 x 10/100 Base-T (RJ-45 shielded)
3
COM
RS422 or RS232
Fig. 4 Ports on the display bottom side
Please refer to the operating instructions of the respectively connected sensor for details on the pin assign-
ment.
Supply voltage:
- Digital display: +24 VDC (18 - 32 VDC)
- Sensor:
The exact values can be found in the operating instructions of the respectively con-
nected sensor.
Power consumption:
- EDU190-4 Pro: 12 W (24 V)
- EDU190-7 Pro: 14.4 W (24 V)
