Page 24
X9751122-A010014MSC
MICRO-EPSILON
Safety
The power supply may not exceed the specified limits
ð
Damage to or destruction of the sensor and/or controller
ð
Danger of injury
Protect the sensor cable against damage
ð
Destruction of the sensor
ð
Failure of the measuring device
1.3
Notes on CE-Identification
The following applies to the capaNCDT series 6630: EC regulation 89/336/EEC
Products which carry the CE mark satisfy the requirements of the EC regulation EC 89/336/EEC
Electromagnetic Compatibility and the European standards (EN) listed therein. The EC declaration of
conformity is kept available according to EC regulation, article 10 by the authorities responsible at
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Koenigbacher Straße 15
D-94496 Ortenburg
Germany
The system is designed for use in industry and satisfy the requirements of the standards
EN 50 081-1
RFI emission
EN 61 000-6-2
Immunity to interference
The systems satisfy the requirements if they comply with the regulations described in the instruction manual
for installation and operation.
