X9751122-A010014MSC
Page 31
English
MICRO-EPSILON
Installaton and Assembly
4.
Installation and Assembly
4.1
Precautionary Measures
No sharp-edged or heavy objects may come into contact with the sensor cable sheath.
In pressurised areas the cable must be protected against pressure loads.
The minimum bending radius is 10 mm (.39 inch). Kinks must be avoided at all cost.
The connections must be checked for a tight fit.
4.2
Sensor
The sensors of the capaNCDT series 6630 may be mounted free-standing or flush. Choose the sensor
position such that the sensor and the target do not touch.
When assembling, make sure that the polished sensor surface is not scratched.
Radial point clamping with grub screw
This simple type of fixture is only recommended for a force and vibration-free installation position.
The grub screw must be made of plastic so that it cannot damage or deform the sensor housing.
Fig 4.1: Radial point clamping with grub screw.
i
IMPORTANT!
A damaged cable
cannot be repaired.
i
IMPORTANT!
Do not use metal
grub screws
ð
Danger of
damaging the
sensor
grub screw
Connector side
