Page 5
Safety
boreCONTROL
Safety
1.
Knowledge of the operating instructions is a prerequisite for equipment operation.
Symbols Used
1.1
The following symbols are used in the instruction manual.
CAUTION
Indicates a hazardous situation which, if not avoided, may result in
minor or moderate injury.
NOTICE
Indicates a situation which, if not avoided, may lead to property
damage.
Indicates a user action.
i
Indicates a user tip.
Warnings
1.2
Connect or disconnect controller components only, if the controller is off.
Danger of injury
>
Damage to or destruction of the controller
>
The power supply and the display/output device must be connected in accordance with
the safety regulations for electrical equipment.
Danger of injury
>
Damage to or destruction of the controller
>
The power supply may not exceed the specified limits.
Danger of injury
>
Damage to or destruction of the controller
>
Avoid shock and vibration to the sensor and controllers.
Damage to or destruction of the sensor and controllers
>
Avoid exposure to aggressive materials (washing agent, penetrating liquids or similar) on
the sensor lance.
Damage to or destruction of the sensor
>
Failure of the measuring device
>
Notes on CE Identification
1.3
The following applies to the measuring system boreCONTROL:
EMC regulation 2004/108/EC
-
Machinery Directive 2006/42/EC
-
Products which carry the CE mark satisfy the requirements of the EMC regulation
2004/108/EC ‘Electromagnetic Compatibility’ and the European standards (EN) listed
therein. The EC declaration of conformity is kept available according to EC regulation,
article 10 by the authorities responsible at
MICRO-EPSILON MESSTECHNIK GmbH & Co. KG
Koenigbacher Straße 15
D-94496 Ortenburg
The system is a not automatically operable device (component). An EC declaration of
conformity or CE identification is therefore not issued by Machinery Directive.
CAUTION
NOTICE
