Page 17
Warranty
boreCONTROL
Warranty
6.
All components of the device have been checked and tested for perfect function in the
factory. In the unlikely event that errors should occur despite our thorough quality con-
trol, this should be reported immediately to MICRO-EPSILON.
The warranty period lasts 12 months following the day of shipment. Defective parts, ex-
cept wear parts, will be repaired or replaced free of charge within this period if you return
the device free of cost to MICRO-EPSILON. This warranty does not apply to damage
resulting from abuse of the equipment and devices, from forceful handling or installation
of the devices or from repair or modifications performed by third parties.
No other claims, except as warranted, are accepted. The terms of the purchasing
contract apply in full. MICRO-EPSILON will specifically not be responsible for eventual
consequential damages. MICRO-EPSILON always strives to supply the customers with
the finest and most advanced equipment. Development and refinement is therefore per-
formed continuously and the right to design changes without prior notice is accordingly
reserved.
For translations in other languages, the data and statements in the German language
operation manual are to be taken as authoritative.
Service, Repair
7.
In the case of a defect on the system, please
send the affected parts for repair or exchange.
In the case of faults whose causes are not
clearly recognisable, please always send the
complete measuring system.
MICRO-EPSILON Messtechnik
GmbH & Co. KG
Königbacher Str. 15
D-94496 Ortenburg
Tel. +49/8542/168-0
Fax: +49/8542/168-90
[email protected]
www.micro-epsilon.com
Decommissioning, Disposal
8.
Disconnect all power supply and output cables on both controllers.
Disconnect all interface cables between both controllers and PC or PLC.
The boreCONTROL is produced according to the directive 2002/95/EC („RoHS“). The
disposal is done according to the legal regulations (see directive 2002/96/EC).
