MCS-THERMOSTAT
REVISION 1.5
20
13. Update Firmware on Thermostat
13.1.
MCS-Thermostat firmware upload
Loading new ‘Firmware’ to the Thermostat (requires proper authorization)
Consult [email protected] for upgrading your
Thermostat firmware and acquiring the
necessary TERMINAL BLOCK CABLE TO ATTACH TO THERMOSTAT.
1.
REMOVE COVER FROM THERMOSTAT AND REMOVE THE WIRES FROM THE PLUS AND
MINUS FOR THE COMMUNICATION OF THE THERMOSTAT.
2.
CONNECT THE TERMINAL BLOCK SUPPLIED TO THE THERMOSTAT- WHITE WIRE TO PLUS(+)
AND THE BLACK WIRE TO GROUND (-) .
3.
USING A MCS-USB-RS485 CABLE (not supplied) PLUG
THE RS-485 END INTO THE SUPPLIED TERMINAL AND
THE USB END INTO YOUR COMPUTER.
4.
Open MCS-Connect and select Setup.
5.
In the drop down menu select Communications.
Cable with terminal block
Enlarged view of Thermostat block wiring
