MCS-THERMOSTAT
REVISION 1.5
13
9. Thermostat Menu Screens
9.1.
SETUP (APPEARS FIRST TIME THERMOSTAT IS TURNED ON)
9.1.1
Net Address (Factory Set At 1)
9.1.2
Units Degrees (F) Or (C)
9.1.3
Auth Level Setup
9.1.4
Sound Alarm Stat
9.1.5
Adjust Backlight
9.1.6
Standby Backlight
9.1.7
Exit Setup Menu
9.2.
MAIN
9.2.1
Unit Status
9.2.2
Config Menu
9.2.3
Enter Password
9.2.4
Unit (Run/Stop)
*
9.2.5
Cool Setpoint
9.2.6
Heat Setpoint
9.2.7
Humidity Setpoint
9.2.8
Co2 Setpoint
9.2.9
Show Version Number
9.2.10
Time And Date
9.2.11
Last Alarm
9.2.12
Lockout Reset
9.3.
CONFIG MENU
9.3.1
Auth Level Setup
9.3.2
Units - F/C
9.3.3
Modify Schedules
9.3.4
Modify Holidays
9.3.5
Temp Cal
9.3.6
Humidity Cal
9.3.7
Display Test
9.3.8
Adjust Backlight
9.3.9
Standby Backlight
9.3.10
Adjust Time
9.3.11
Adjust Date & Dow
9.3.12
Thermostat Reset
9.3.13
Sound Alarm Stat
Use
‘UP’
‘DOWN’ and
‘ENTER’ BUTTON TO MOVE BETWEEN SETTINGS
SEE NEXT PAGE FOR DESCRIPTIONS
OF MENU ITEMS AND
AN EXAMPLE OF AUTHORIZATIONS LEVELS
*
NOTE: SOME MENU OPTIONS MAY NOT SHOW
ON YOUR THERMOSTAT LCD SCREEN.
THESE SELECTIONS MAY NOT BE SETUP IN THE
CONFIGURATION FILE FOR YOUR CONTROLLER.
AFTER LAST SELECTION HAS BEEN MADE
CLICK ON ‘MENU” TO RETURN TO THE
‘UNIT STATUS SCREEN’
CLICK ON THERMOSTAT UPDATE
PRESS ENTER TO UPDATE.
THE THERMOSTAT WILL REBOOT
