background image

KSZ8864 Evaluation Board User’s Guide 

Micrel Inc. 

Page 27 

5/9/2014 

 
 
 
 
 
 

MICREL, INC.   1849 FORTUNE DRIVE   SAN JOSE, CA   95131   USA 

TEL +1 (408) 944-0800 

FAX +1 (408) 474-1000    WEB http:/www.micrel.com 

The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is 

assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the 

customer. 

 

Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where 

malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or 
systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be 
reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support 

appliances, devices or systems is a Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages 

resulting from such use or sale. 

 

© 2014 Micrel, Incorporated.

 

 

Summary of Contents for KSZ8864





























Reviews: