KSZ8864 Evaluation Board User’s Guide
Micrel Inc.
Page 19
5/9/2014
For Read or Write registers, reg is the offset address of the register, value is Hex number.
The ‘run file’ command can execute multiple commands by a script file, the script file is a .txt file
which can be created by any edit tools.
Æ
run xxxx.txt //will run the .txt script file.
5.4 MDC/MDIO MIIM Software Tool
5.4.1 MDC/MDIO MII software installation
The software tool can be used to access all MIIM registers for PHY based.
This install file of the software tool locates in folder of Window SPI_I2C_MIIM Tools in the
software tools folder of the Design Kit, there is MicrelSwitchPhyTools_1.xx.msi file which is
clicked to install application file and add two application icons on the desktop, this installation just
do one times only, the application file will be copied into the folder of
Micrel\MicrelSwitchPhyTools (default) or other assigned folder in the installation.
The MDC/MDIO MIIM Software Tool can be executed directly by clicking its application file or
icon with name of MicrelMDIOConfigWinApp on the desktop.
5.4.2 On board jumper setting and Software Application
Before run the software tool, the JP2, JP3 and JP4 should be closed, please check the MDC/MDIO
setting in section of 4.7 MIIM SMI mode section. After click its icon, a Window will pop up as
follow:
