EDM-MD Series
Installation Manual
Page 2
WARNING: Avoidance of Injury, Electric shock and Fire
Safety Beams MUST be installed to ensure threshold safety.
Installation and adjustment must be performed by approved personnel only.
Repair and/or alteration to the control box and motor are prohibited.
The power should be switched off during installation and service.
Power supply of 200~240V AC only to used.
CAUTION: Avoidance of Injury and Malfunctions
Do not switch off power supply whilst door(s) in motion.
Ensure sliding door travel area is clear before switching power switch ON.
Keep fingers, clothing & hair, clear of belt and all moving parts.
Protective gloves should be worn when handling metal parts.
CAUTION: Avoidance of Injury during Maintenance & Disposal
Risk of crushing or impact by a falling door panel or other solid object onto a person can be
avoided by laying any heavy object horizontally onto the floor, to one side of the working area.
Risk of slipping, tripping or falling can be avoided by placing any removed objects to one side of
the working area. A safe working area should be maintained by cordon or other temporary
boundary.
