XTP501 & XTC501 User’s Manual
Michell Instruments
21
OPERATION
2.7.4 Alarms Page
Figure 21
Page Alarmes
The analyser has 2 user-configurable alarms which are freely assignable within the calibrated
range. The alarm relays are Single Pole Change-Over (SPCO) and are rated to 250 V, 5 A
maximum. Both alarms can be set as high, low or off. Both alarms can be activated to test
their operation by highlighting the Toggle option and pressing either up or down arrow.
Setting
Description/Operation
Options
AL1 SETPOINT
% set point for alarm relay 1
0 to 100%
AL1 CONFIG
Turn on/off and set to HIGH or LOW
OFF, LOW OR HIGH
AL1 TEST
Toggle alarm by pressing up or down
arrow
N/A
AL2 SETPOINT
% set point for alarm relay 2
0 to 100%
AL2 CONFIG
Turn on/off and set to HIGH or LOW
OFF, LOW OR HIGH
AL2 TEST
Toggle alarm by pressing up or down
arrow
N/A
