Copyright © 2009-2012 Micca, LTD. All rights reserved.
X.
Troubleshooting
The following are some common questions and answers. If the following does not
provide the answer you are looking for, please check the FAQ section on
http://content.miccastore.com
to see if any updated answers have been posted. You
may also send an email to
for personalized help.
No video output, or distorted video on screen.
Most likely, the player has not been set to the correct output mode. If connected using
the AV Red/White/Yellow cable to the TV, press the <AV> button on the remote to
toggle the output mode. If connected using the HDMI output to the TV, press the <HDMI>
button on the remote to switch the player to HDMI output mode.
Video file format not supported or plays without sound.
The Micca Speck supports a wide range of popular video and audio formats. However,
there are many specialized or proprietary video and audio formats which while rare is
still in use. Occasionally a video will be encoded in one of these formats and fail to
playback on the Micca Speck. If you run into such a video, contact the source of the
video to ask what format it is encoded in and check it against the list of audio and video
formats that the Micca Speck supports. It may be possible to recode the video in to a
more common format. Contact Micca technical support if you need assistance.
USB flash drive or hard drive does not show up.
The Micca Speck supports drives up to 2TB in size that use MBR partition table and
NTFS or FAT32 file system. MBR/NTFS is the native format for Windows PCs and is
also supported by Linux and MacOS. Check to see if your drive is using MBR partition
table and NTFS file system if it does not show up on the Micca Speck.
The Micca Speck is able to power most portable USB hard drives through its USB port.
Older USB hard drives that require a USB Y-cable to draw power from two USB ports
may not function correctly due to excessive power requirement.
