Micanan PRO-LH, Installation Instructions Manual

Page: 3 / 39

3
Upon delivery of your MICANAN SYSTEMS medium-duty jackshaft door operator, please inspect the unit carefully for
damage. Verify that operator horsepower, voltage, phase and amperage correspond to available power supply and door
application. Check that along with your operator you have received the following standard hardware.
1 x OPEN/CLOSE/STOP 3-button control station:
1 x #41 Drive chain package : 4’ (1.2m) c/w #41 connecting link
1 x Drive Sprocket 41B12 x 1” c/w 2 set screws and
¼ ” x 1-1/4” keyway
1 x Door Sprocket 41B32 x 1” c/w 2 set screws and
¼ ” x 1-1/4” keyway
Note: Sprocket size and bore may vary according to
door size and type, shaft size and drum diameter
1 x Chain keeper
1 x Keyring
4 x 3/8” bolt, hex nut, lock washer and flat washer
1 x pocket wheel hand chain
(Model PRO-LH) (2 x door height less 4’ (1.2m))
1 x Warning sign
1 set of Micanan photocells (
supplied when operator ordered
with interface module or logic board controls )
VERIFICATION OF OPERATOR AND HARDWARE