Mia Cucina HF177, Instructions Manual

Page: 8 / 24

10 11
Installation
Instructions
■
Basic dimensions
Figure 1: Cabinet explode view
Cabinet dimension (mm) (including the minimum clearance)
A Inner width 560-570
B Total depth Min. 550
C Inner height 1776-1782
Product dimension (mm)
D Total width 555
E Total depth 540
F Total height 1770
Installation
Instructions
■
Preparation work before installation of the cabinet
1. Determining the opening direction
Opening direction of the refrigerator ex-factory is left-hand door direction.
If right-hand door is needed, exchange the upper and lower hinges and install them on the left side.
Exchange direction is the same as the arrow direction shown in the figure.
2. Installing clearance adjusting plate
If T18 cabinet is used, installation clearance adjusting plate is not needed.
If T15 cabinet is used, installation clearance adjusting plate is not needed.
3. Installing upper fastenings and upper pad
Fix the upper fastenings on the refrigerator with screws first, and then install the upper pad on the refrigerator
and ensure the upper pad can move forward and backward at the same time.
4. Installing lower fix leg and position adjusting plate
Fix the lower fix leg to the refrigerator with screws first, and then lock the position adjusting plate to the left
side of the lower fix leg.
Installation of upper pad Installation of lower fix leg and position adjusting plate
Indication diagram of hinge exchange
Enlarged view of clearance
adjusting plate
T18 cabinet is a cabinet with a wall thickness of 18 mm.
T15 cabinet is a cabinet with a wall thickness of 15 mm.
Caution