Mia Cucina HF177, Instructions Manual

Page: 9 / 24

12 13
Installation
Instruction
5. Installing wind stops
Install wind stops on the back cover of the compressor. Insure the distance of condenser and cabinet no less
than 10mm.
6. Installing door gasket baffle
Remove the door gasket baffle from the door, and install it onto the hinge.
Installation
Instruction
■
Putting the refrigerator into the cabinet.
1. Pass the power cord through the hole on the
back of the cabinet. If the socket is within the
cabinet, please insert the power plug of the
refrigerator into the socket, and then put the
refrigerator into the cabinet.
2. Move the refrigerator into the cupboard, and
adjust position of the refrigerator to make sure
the door gasket baffle is closely attached to the
front end of the side plate of the cupboard and
the position adjusting plate is closed attached
to the end surface of the side plate of the
cupboard.
3. Adjust the position of the refrigerator horizontally to make sure clearances between the refrigerator and
the cupboard side boards are the same.
4. Fix sides of the hinge with screws (2 screws: the 1
st
screw is used to fix the 1
st
hinge, and the 2
nd
screw is
used to fix the 4
th
hinge). Insert other screws into screw holes on the hinge and fasten them tightly upon the
installation of cupboard doors.
Screws to fix the hinge
5. Fix the lower fix leg and the position adjusting plate onto the side plate of the cupboard with wood
screws.