Mi-T-M HS SERIES, Operator'S Manual

Page: 13 / 92

Operator's Manual 3
WARNING
RISK OF EXPLOSION OR FIRE!
ALWAYS STORE FUEL AWAY
FROM THE WASHER WHILE THE
UNIT IS RUNNING OR HOT.
ENGINE/BURNER FUEL TANKS:
. Review "Risk of Explosion or Fire" warnings, before fueling.
2. Locate the Safety Decals on your unit and heed their warnings.
3. Engines: See Engine Owner's Manual for fuel requirements.
Burner Fuel: When filling tank, use No. 1 or No 2 fuel oil/diesel or
kerosene.
4. Check the engine oil level before starting the engine. (See Engine
Manual.)
5. Refer to the Engine Manual supplied with this unit for proper engine adjustment
procedures.
6. Review the Engine Manual accompanying this pressure washer for
correct engine start-up and maintenance procedures.
DANGER
RISK OF FIRE!
-DO NOT SMOKE WHILE
FUELING!
-DO NOT FILL THE FUEL TANKS
WHILE UNIT IS RUNNING OR
HOT. ALLOW UNIT TO COOL
FOR TWO MINUTES BEFORE
REFUELING.
-DO NOT FILL FUEL TANKS TO
POINT OF OVERFLOWING.
ALLOW APPROXIMATELY 1/4"
OF TANK SPACE FOR FUEL
EXPANSION.
INSTALLATION & PREPARATION
DUAL LANCE ASSEMBLY WITH ADJUSTABLE PRESSURE:
This unit features a dual lance assembly with adjustable pressure which allows
the user to select a high or low pressure spray. Simply rotate the adjustable
grip on the dual lance to achieve the desired pressure selection.
. Selection of high pressure can be achieved by turning the adjustable
grip on the Dual Lance assembly counterclockwise .
2. Selection of low pressure can be achieved by turning the adjustable grip
on the Dual Lance
clockwise.
WARNING
RISK OF INJECTION CAUSING
SEVERE INJURY!
-THE TRIGGER GUN SHOULD
ALWAYS BE LOCKED IN THE OFF
POSITION WHEN NOT IN USE!
-NEVER LOOK DIRECTLY AT
THE NOZZLE UNLESS IT IS
DISCONNECTED FROM THE
TRIGGER GUN/DUAL LANCE
ASSEMBLY!