SB44SS Outdoor Woodburning Fireplace
87D0059
9
FIrepLaCe LOCaTION
CauTION: do not install fireplace over carpeting.
This fireplace does not weigh more than large pieces of furniture and can normally be located near a
load bearing wall without requiring additional foundations or supports. If however, the fireplace is to
be trimmed with a heavy stone or brick facing and hearth extension, be sure the supporting structure
is adequate.
Figures 1, 5, 6 and 7
provide dimensional details of the fireplace, required spacing to combustible walls,
and some suggested fireplace locations. When selecting a location, choose one that is away from
frequently opened doors, central heat outlets or returns, or other places where air movements may
disturb the airflow around the fireplace. Air turbulence near the fireplace may cause smoke to spill out
of the fireplace opening.
64
56QE
” Min.
53
6
”
19
6
”
Min.
92
6
” Min.
19
6
”
Min.
**16"
Min.
1
56O
”
Air Space
Clearance
27
(6
”
Min.
FP2237
SB65400 framing
23
56O
" Min.
*28” Min.
*Applies when Glass Doors are not installed
**Applies when Glass Doors are installed
Figure 5
Corner Installation
Side Wall Installation
Figure 6
FP2220
fireplace location
Corner
Full Protection
Flush
FP0
FP1001
fireplace setting
1/4/00 djt
8’
Min.
10’
Min.
FP1001
NOTe:
If the fireplace is a freestanding unit, it must
be located a minimum of 10’ from the opening of the
firebox to a combustible structure.
A minimum height of 8’ measured from the bottom of
the unit to the bottom of the termination cap is permit-
ted.
Figure 7